Megabass Spine-x 190f
Megabass Spine-x 190f
Couldn't load pickup availability
SPINE-X is a segmented subsurface swimbait equipped with an innovative user-controlled wire-through titanium spinal system to deliver dynamic action. Megabass’ LIVE-WIRED SYSTEM(PAT.P) leverages the shape-memory properties of titanium wire to add layers of customizable control to SPINE-X’s swimming movement. Included with three titanium “spines,” anglers can add multiple wires at a time for tighter “s” swimming and a faster recovery rate between segmented joints. By changing the number of titanium wires, anglers can adjust the suppleness and tension of SPINE-X to perfectly match angler input and target preferences. This not only enables situation-specific tuning but adds a dynamic element of internal tension to the swimbait’s movement, contributing to its lifelike appeal.
Developed to target those exceedingly discerning trophy predators, SPINE-X swims with sinuous flash and sends twitches and jerks shuddering from tip to tail with unsurpassed realism.
LIVE-WIRED SYSTEM(PAT.P)
A breakthrough tuning system that harnesses titanium wires to add spinal tension to the movement of segmented lures. Connecting each joint with titanium’s shape memory properties adds an additional layer of tension and joint recovery to the lure’s swimming motion, resulting in compelling realism. Wires can be added or subtracted to fine-tune the swimming motion to the situation, enabling precise alignment to predatory tastes.
SPINE-X ORIGINAL TAIL
The tail of the SPINE-X is made of elastomer material carefully formulated for supple swimming performance. Designed to facilitate retrieve speeds from dead-slow to extra-fast, the tail dynamically flexes to keep SPINE-X swimming with tight appeal, exhibiting a lifelike action reminiscent of hasu and ugui.
Maintenance instructions for elastomer tails/fins
In case of "bends" or " kinks" in the elastomer tails/fins, maintenance is recommended for optimum setting.
1.Have boiled water
Fill a container with the boiled water and soak the tails/fins for 1 minute.
2.Remove and shape
If the kink cannot be completely removed, bend it in the opposite direction to straighten it.
3.They can get kinked again when the tails/fins are still warm, so cool them down with running water.
Items recommended for maintenance: i-BRAKE , i-SLIDE , SPINE-X etc.
